Why doesn't the cooler cool the water?

Incorrect operation of the cooler causes inconvenience. What to do in such a situation? You can simply turn to specialists for help. But what to do if you have neither the time nor the money to contact the service? You can try to solve this problem with your own efforts. If the device cannot cope with cooling, this may be caused by various malfunctions. Most often this is due to improper transportation, installation or unsuitable operating conditions.

Before turning to a specialist for help, you can try to figure out the problem on your own. This solution will allow you to find a gentle way out.

Why doesn't the cooler cool the water?

Have you noticed that the equipment was working correctly, but over time it does not cool the water? The reason for this situation may be quite simple; eliminating it will not be difficult. In some situations, without contacting specialists, it will be impossible to solve the problem.

REFERENCE. The equipment is capable of cooling only 3-4 glasses per hour, no more. The average chilled water temperature can be 5-15 degrees, depending on the type of system.

Reason 1 - insufficient water cooling

This malfunction may occur for the following reasons:

1. Does one cooler work for a lot of people? Most likely, he simply does not have time to cope with the tasks assigned to him. Depending on the type of cooling used in the device, give it the necessary period of time to perform its cooling function. On average, 15 minutes will be enough.
2. Another cause of this malfunction may be improper adjustment of the water thermostat. Most likely it is set at an insufficient level. To correct this situation, you should change the current settings.
3. Is the appliance too close to the wall? In this case, there is probably not enough ventilation. To fix this problem, you should check if there is a small gap between the case and the wall; it should be at least 10 cm.
4. Overheating of the device elements that are responsible for cooling the water. The solution is very banal - unplug the cord from the outlet for half an hour.

Reason 2 - complete lack of cooling

If the equipment is sent with a water cooling function, then this may be due to the following reasons:

1. Is the equipment connected to the network? There may be no voltage in the network or there is a problem with the outlet.
2. Check if the toggle switch that controls the cooling function is turned on. You can find out the correct position of the toggle switch in the instructions.
3. In electronic systems, the fan or Peltier element may not work. In this situation, it will be necessary to replace the failed parts.
4. A device that operates on a compressor. It is likely that the compressor is not working. It can be repaired or replaced.

REFERENCE. A serious reason is a freon leak. The reason is the occurrence of microcracks as a result of careless handling of the radiator grille.In this case, repairs are possible only at a service center.

In principle, each of the above problems, if desired, can be dealt with by an inexperienced technician, if necessary.

Self-repair or professional help?

Some causes of cooler malfunctions that lead to a failure of the cooling system can be solved with your own efforts. But in any case, if you do not have experience in performing such work, it would be better to turn to specialists. This will guarantee high-quality and prompt repairs.

Do not delay the repair of this equipment; repair it yourself or contact a qualified technician for help.