How to choose a laptop cooler according to parameters: advice from professionals

There are several proven ways to choose a laptop cooler. First of all, it is necessary to clarify the type of model installed on the device. Based on this, you can determine the socket type and other parameters. Advice from professionals on choosing a model is described in this article.

Main settings

When choosing a suitable cooler, you should take into account not only its technical parameters, but also consumer qualities, for example, noise level. It is equally important to pay attention to the manufacturer’s brand, as well as the price range.

Socket type

A socket is a type of connector into which the cooler is installed. There are several types of standards; to recognize them, it is not necessary to disassemble the laptop - the choice of cooler is carried out as follows:

1. Check your laptop model.
2. Go to the manufacturer's website, for example, AMD.
3. They find data about which socket the cooler can be attached to.

As a rule, the same device can be installed in different slots. But often only 1-2 types are given in the description. Therefore, you first need to figure out how to find out the cooler socket for the processor, and then clarify the information in the model description on the manufacturer’s or store’s website.

TDP

This indicator characterizes heat release, i.e. The amount of heat generated by the processor during operation. The parameter is measured in W and can vary over a wide range.The least powerful devices have 4.5 W, but there are models with 100 W and even more.

Unlike the method described above on how to find out the cooler socket, in this case it is not necessary to go to the manufacturer’s website. You just need to clarify the TDP of the processor and choose a cooler with at least a small margin. For example, if the TDP of the processor is 65 W, the cooler must have a power of at least 75 W, and optimally 100 W.

Body and base material

The body is made of metal, often copper. Moreover, you need to pay attention to the composition from which the base is made.e, since this is what contacts the chipset. It can be made of aluminumI, copper or their alloy

This is the best option, but you need to pay attention to the fact that the base passes through the central part of the processor. Then the cooling effect will be maximum. If the copper tubes go in lateral directions, there is little point in them.

Radiator material

The radiator is most often made of aluminum, since it is the most inexpensive metal. But it is best to choose models with copper radiators. They cost a little more, but the cooling efficiency is noticeably higher.

What else to pay attention to

When understanding how to choose a heatsink for a processor, it is worth studying additional parameters:

1. The number of tubes that remove heat varies from 1 to 8. If you select the optimal model, you can stop at 4. Moreover, they should pass as far as possible to the central part of the processor, which heats up the most.
2. Connector type - can be 3 or 4 pin. It is better to choose the latter option, since such models automatically adjust the number of fan revolutions in 1 minute.Thanks to this, the device will last longer.
3. The noise level directly depends on the rotation speed. If the indicator is within 500 rpm, there is practically no noise, and if at the level of 1500, it can be assessed as average. But models with a rotation speed of more than 2000 rpm are too loud and can irritate the user.
4. Flow power is an indicator measured in CFM. The bigger it is. the more efficient the cooling is.

The selection of a cooler for the processor is carried out according to the parameters described above. It is also recommended to take into account the manufacturer’s brand and reviews from real customers. Thanks to this, you can purchase a fairly high-quality device at a reasonable price.