Air conditioning Royal Clima. Instructions for use, country of origin and other useful information

Air conditioners have long been a part of our lives. In summer they save from the heat, and some also from the cold in winter. Royal Clima is an Italian manufacturer of climate control equipment, on the market since 2004. Their products are popular in Europe, and over the past few years they have been in demand among residents of the CIS countries. If you want to get a high-quality air conditioner/split system with a remote control, multiple operating modes, high power and reliability, then buy the Royal Clima air conditioner.

If you are just getting ready or have already purchased a split system from Royal Clima, but have lost the instructions for it, then read on - the principle of operation of the Royal Clima air conditioner, the purpose of the air conditioner, the design of a split system from Royal Clima, instructions on how to use the Royal Clima air conditioner, designations and split system control.

Royal Clima air conditioner, purpose, operating principle

Like all air conditioners, Royal Clima is designed for cooling/heating and ventilation of air and objects in a domestic space. The company's products are not suitable for use in specialized/professional premises.

Operating principle of air conditioners (split systems)

Each split system consists of two interconnected blocks - external and external.The operating principle of each air conditioner and split system is based on the property of substances to absorb and release heat when their state of aggregation and pressure changes, that is, to be cold in a liquid state and heat up in a gaseous state. Refrigerants have these properties. Air conditioners use freon.

It all starts in the indoor unit - the fan sucks air inside the unit. There he blows through the tubes of the refrigeration circuit with gaseous refrigerant (warm). Freon goes through these tubes to the external unit where the compressor is located. The compressor increases the freon pressure. Because of this, freon first heats up, then cools, is blown by cold air from the street and turns into a liquid that absorbs heat. Liquid freon flows through the return pipes into the indoor unit, passing through the thermostatic valve. The cold tubes absorb heat from the air and a fan blows out cold air at the outlet.

A thermostatic valve is needed to change the direction of movement of freon. That is, you can make it go in the opposite direction. Then, when leaving the compressor, it will be hot, and hot it will go into the indoor unit. There it will be blown with air and warmed up.

Installation of the Royal Clima split system

Royal Clima split system design - units, remote control, front panel.

As already mentioned, the system consists of two blocks - external and external. But there is also a control panel on the front panel of the indoor unit and a remote control. Let's look at their structure in order.

Indoor unit:

• Front side
• Air intake grilles
• Air filter
• Exhaust air grille
• Dampers for adjusting the direction of the supplied air (vertical and horizontal)
• Indicators
• Thermostatic valve
• Fan

External unit:

• Pipeline from the indoor unit
• Pipes for condensate drainage
• Air intake grille
• Air outlet grille
• Compressor
• Fan

Control Panel:

• Indicators (power, status, temperature, operating modes, timer)
• Start/Shutdown Button

Remote control (buttons):

• Turn on/off
• MODE – switching between operating modes
• SPEED – regulation of the speed of blown air
• SLEEP – silent, economical mode (night)
• iFAVOR – return system settings to factory settings
• iFEEL – display of room temperature/exhaust air
• TIMER – self-shutdown timer
• SWING – regulation of air direction using blinds
• TURBO – maximum power/turbo mode
• AntiFUNGUS – fighting mold inside the air conditioner
• Triangles - temperature adjustment

How to use an air conditioner from Royal Clima, instructions for use and control of the Royal Clima split system.

In fact, operating an air conditioner does not require much intelligence. If it is installed correctly and there are no leaks, then all instructions for use boil down to the following:

• Insert the plug from the air conditioner into a socket with a frequency of 50 Hertz and a voltage of 220 Watts.
• Press the on/off button on the remote control or in an emergency/loss of the remote control on the indoor unit of the split system.
• Select the operating mode - night, turbo, automatic, cooling, dehumidifying, ventilation, heating (all of them are described above in the section “Design of the Royal Clima split system/Remote control (buttons)”).
• Set the desired air temperature using the triangle buttons on the remote control.

After a few minutes, the air conditioner will operate in the selected mode and blow out the set air temperature.

Make sure that the device is installed correctly, that the condensate drain pipes or refrigeration circuit are not leaking, or that the power cords are not damaged, otherwise the device may not work or operate incorrectly.