Refrigerator door won't close

Broken refrigerator doors are often the reason to purchase a new product. If there is no tightness, the equipment will become unusable over time. Therefore, it is recommended to carefully monitor the condition of the refrigerator, checking how tightly the door closes. This will help to avoid deterioration in the operation of the unit and correct the situation in time.

Tightness is the basis for normal operation of the refrigerator

If the door is not closed tightly, warm air begins to flow inside the refrigerator. At a minimum, ice will form on the walls of the equipment. You can get rid of it by defrosting it. But such consequences are the most harmless. In the worst case scenario, the thermostat will no longer function correctly, causing the cooling system to circulate freon unnecessarily.

The equipment will begin to wear out, then the motor will overheat and inevitably break down.You will have to purchase a new unit. To prevent this from happening, it is recommended to take timely measures to correct the situation.

Ways to check the tightness of the refrigerator if the door does not close

If the doors no longer fit tightly to the refrigerator, you should find the reasons for this. First, inspect the contents of the unit. Perhaps the seal is broken due to the handle of the frying pan or the drawer is not fully closed. If everything is fine inside, you should use the following checking methods:

1. Make sure the unit is installed correctly. A barely noticeable, minimal tilt is allowed. But it’s better if the product stands perfectly level.
2. Check how tightly the doors are pressed against the equipment frame. To do this, you need a paper probe, which helps to verify the tightness.

In some cases, you can carry out repairs yourself. But if this is not possible, you should contact a professional. Do not waste time, otherwise the refrigerator will quickly become unusable.

The main reasons why the door may not close

There are several reasons that could provoke such a situation. Among the most common:

1. There's something disturbing inside. It has already been noted that the handle of a pan or a container that is not completely pushed against the wall can lead to a leak. This reason is one of the most common. Therefore, it is recommended to begin the search for reasons by checking the correct arrangement of products in the unit.
2. Rubber compressor. If it is dirty, greasy or worn out due to long service life, then the door will no longer close tightly.
3. The spacer element is broken. It could have become loose, leading to similar consequences.
4. The door was deformed.This could have occurred due to regular overload of bottles and heavy products.
5. Incline. An uneven floor negatively affects the operation of the closing mechanism.

How to test your refrigerator door for leaks yourself

To do this you will need a piece of paper. It must be secured to the rubber door seal. Then try closing it. If the door fits tightly to the box and the sheet continues to hang, this indicates that there are no leaks. If this does not happen, the sheet falls, which means it is necessary to find the cause of the problem and eliminate it.

Reference! If you are not confident in your own abilities to troubleshoot the problem, it is recommended to contact a specialist. Otherwise, you can only make the situation worse.

Self-remediation of leaks

There are several different malfunctions associated with tightness and, accordingly, ways to correct the situation. Therefore, you should deal with each one.

How to change the seal yourself. (Step-by-step instruction)

The seal is a special rubber band, which helps keep the doors tightly closed. In some situations it may need to be replaced. To do this, follow the instructions:

1. Prepare the necessary tools. In addition to the new seal, you will need glue and a flat-head screwdriver.
2. Prepare your equipment. Turn off the refrigerator and wait about 30 minutes. Remove the old seal by pulling it out with a screwdriver. It is also worth unscrewing the bolts.
3. Clean up. You will need a sponge and soap solution. You need to clean out the rubber channel.
4. Make a replacement. The new elastic band stretches along the entire contour of the door. Insert into the channel, secure with glue.The structure should be heated with a hairdryer. If there is no special construction one, a regular one will do.
5. Check it out. If everything is done correctly, the unit should open with little effort. If there is no suction effect, then the elastic band does not fit tightly and this should be corrected.

How to adjust the door. (Step-by-step instruction)

To adjust the door, follow the following instructions:

1. Preparation. You will need a wrench. It is also worth turning off the product and leaving it for 30 minutes.
2. Fit. Open the unit and slightly loosen the bolts at the top and bottom. Then you need to tighten them. If there is a skew at the top, then it is recommended to remove one top tab and tighten the screws back. If the problems are in the lower part, then you should do the same manipulations, but from below.

Reference! It is recommended not to make adjustments alone. It is better if someone helps to hold the product so that the unit does not become deformed.

How to eliminate skew. (Step-by-step instruction)

To eliminate misalignment, it is sometimes necessary to rehang the door. To do this, follow the following instructions:

1. Preparatory stage. The equipment is turned off and left for a while. If the design allows, it is worth removing the covers at the bottom and top.
2. Withdrawal. Start unscrewing the bolts with those at the bottom. To do this you will need a screwdriver. After the bottom part, proceed to the top. Pay close attention to the detail.
3. Outweighing. It is worth performing this action with an assistant. The part is heavy and it is more convenient if a second person holds it. Move it to the other side. Then start screwing in the bolts. First the top ones, then the bottom ones. Place plugs on existing holes. Return the lid to its original position.Make sure the work done is correct. If necessary, tighten the bolts further.

How to Prevent the Refrigerator Door Open Problem

To avoid such problems, it is recommended to follow some tips:

1. Try not to slam doors.
2. Once you have closed the refrigerator, do not immediately open it again.
3. The seal needs regular cleaning. Therefore, it is worth monitoring the condition of the rubber in the unit.

The tips listed will reduce the risk of deterioration of sealing and complete failure of the structure.