Atlant two-chamber refrigerator: malfunctions and reasons for their occurrence

Malfunctions of the Atlant two-chamber refrigerator are usually associated with a malfunction of the thermostat and cooling system. Modern models are equipped with a display that will show the error code. But often it is not possible to determine the cause on your own. An overview of the most common situations, as well as repair instructions, are presented in this article.

Signs of trouble

Malfunctions of the Atlant two-chamber refrigerator with 2 compressors manifest themselves in different ways. The most commonly observed are the following:

  • the unit does not turn off and continues to operate;
  • knocking sounds are heard from the engine;
  • layers of artificial snow are frozen on the internal surfaces;
  • vibration is felt, and it can be so strong that the unit collides with the wall;
  • you can hear a creaking, crackling sound;
  • insufficient cooling;
  • Another sign of a malfunction in the Atlant two-chamber refrigerator is that the red light is on.
  • quick shutdown;
  • the light does not light;
  • The temperature inside the freezer is unstable.

Atlant refrigerator – red light is on

How to determine the cause

If the Atlant refrigerator does not turn on or its red light comes on, information about the cause of the malfunction will be displayed on the display. It is quite simple to understand - you need to know the decoding of the code:

  1. E2 – the evaporator tap is broken,
  2. F1 – failure of the temperature sensor, due to which the system does not gain the required power.
  3. F2 – if the refrigerator has a Fresh function, this indicates that the heating controller is broken. When operating in No Frost mode, the code indicates that the thermostat in the freezer compartment is broken.
  4. F3 – the thermostat does not work or the defrosting circuit is broken (for systems with No Frost).
  5. F4 or F5 – a signal indicating a failure in the electrical voltage, for example, during a sudden shutdown. This malfunction corrects itself, but if after the Atlas drop the refrigerator does not turn on, you need to call a specialist to inspect the electrical system.

Cause of refrigerator malfunction

Next, the main causes of breakdowns, as well as ways to eliminate them, are discussed in more detail.

Refrigerator won't turn off

If the Atlant refrigerator does not turn off, the malfunction may be associated with operation in the fast freezing mode (if it is provided for a specific model). In this case, the installation works continuously for 12 or even 14 hours, which is normal.

But there may be more serious reasons, for example, weak pressing of the thermostat. Over time, the mounting tubes become loose due to vibration, causing the contact of the thermostat to become insufficiently tight. Eliminating this malfunction of the Atlant two-chamber refrigerator according to the instructions involves restoring the fastening system:

  • tighten all elements;
  • if the screw is covered with rust, replace it;
  • if the tube is rusty, it also needs to be replaced.

If everything is fine with the fastener and the parts are relatively new, you need to look for other reasons. They may be associated with the following factors:

  1. The capillary flow is clogged.
  2. There is a freon (coolant) leak.
  3. The thermostat circuit is broken.
  4. The relay is broken.

If you have the skills, you can replace the relay yourself. But if after this the Atlant refrigerator does not work, you need to call a technician.

Backlight problems

If the backlight does not work, just replace the light bulb:

  1. Be sure to disconnect the device from the network.
  2. Remove the protective shade.
  3. Remove the old light bulb and install a new one.
  4. Put the lampshade in its original place.

But it may also be that even after replacing the light bulb, it still does not shine. Then, most likely, it will not be possible to repair the Atlant two-chamber refrigerator yourself, since the reason is more complex. It is recommended to call a specialist.

Accumulation of water under the housing or in the chamber

In this case, there may be several reasons, the most common are:

  • violation in the defrosting system: if the No Frost function is present, it is necessary to replace the heating element, since it is damaged, causing water to leak into the chamber;
  • The thermostat does not work;
  • the drainage channel is clogged - you can clean it yourself;
  • the water pipe comes off - the body is put back in its original place, and then the water will again begin to collect in a special tank;
  • The tank itself is damaged - then it needs to be replaced with a new one.

Accumulation of water under the housing or in the chamber

If water appears inside the refrigerator compartment, the simplest reason is that the door does not fit tightly enough. It needs to be opened and closed several times to make sure how tightly it sticks to the surface.

It is best to replace the seal - even if you have available tools, you can do it yourself. Thanks to good contact, warm air from the apartment will not penetrate into the chamber, so water will not form there.

It wouldn’t hurt to check the temperature by placing an outdoor thermometer inside on the shelf. Normally it should be in the range of 2-6 degrees Celsius. If it is higher, the Atlant two-chamber refrigerator does not have a refrigerating chamber. In this case, you should also call a specialist to your home.

Snow accumulations on interior surfaces

This problem is often observed in the hot season, when the refrigeration unit operates at maximum voltage level. Due to the fact that there is continuous cooling and the difference with the room temperature is very large, the surface cools down greatly. Moisture from the air in the refrigerator compartment condenses on it, which quickly turns into snow build-up.

The reasons for this malfunction of the Atlanta two-chamber two-compressor refrigerator can also be different factors:

  • the drainage system is clogged;
  • liquid leaks from the evaporation system;
  • The temperature sensor is broken;
  • violation of the temperature regime (for example, the refrigerator is operating at maximum power, and the room temperature is above +36 ° C).

Violation of the rules for using a refrigerator can be identified as a separate group. For example, if you put hot food or containers in it, or keep the door open for too long, over time snow growths will appear on the walls again.

Thus, if you treat your equipment with care, it will last much longer than the warranty period. If a breakdown occurs, but you cannot independently determine the exact cause, you should call a specialist. Do-it-yourself repairs in this case can lead to even bigger problems.

Comments and feedback:

Washing machines

Vacuum cleaners

Coffee makers