Why is there an antenna on the ironing board?

All over the world it is difficult to find a home that does not have an ironing board. There are no uniform standards for creating an ironing board design. It can be absolutely simple, or it can contain a number of details that can be understandable to the average person, or can leave questions about the nature of its purpose.

Why is there an antenna on the ironing board?

The design of the portable ironing board is a folding mechanism with a flat board on which the ironing process takes place. This board should be covered with soft non-stick fabric. And the structure itself should not be subject to corrosion over time under the influence of moisture released by the iron during ironing. These parameters are enough to create the simplest ironing board design. Additionally, it can be equipped with a metal stand for an iron, shelves for linen, legs can be made in the form of a stepladder, etc. One of the most confusing objects on an ironing board is the antenna.

What is the function of the antenna on the ironing board?

The device in the form of an antenna on the ironing board is nothing more than a holder for the cable wire of the iron, which is connected to the network.This holder is located in the area of ​​the stand on which the hot electrical appliance is placed during ironing.

Important! This device is needed to help the person ironing the clothes to control the movement of the wire during ironing.

The purpose of the holder is to prevent the hot surface of the iron from running over the cable during the action of smoothing the fabric. The danger is that high temperatures can have a detrimental effect on the wires located under the fabric or plastic surface of the cord. Periodic exposure of the cable to the hot surface of an iron can significantly reduce the life of an electrical appliance. In addition, in the event of an electrical short circuit, this can be dangerous to the life and health of a person who at that moment will hold the iron in his hands without following safety rules.

Attention! A person can significantly protect himself from electric shock by standing on a rubber mat while ironing or by wearing rubber slippers. Rubber is a grounding conductor for current that can escape from a person during an accident.

In addition, the cord holder can make ironing easier. This is due to the fact that an unsecured cord can cling to the fabric through friction against it, which can lead to wrinkles, and in cases with delicate natural fabrics, tear them.

If the socket for connecting the iron is located above the level of the ironing board, then it makes sense to use a wire holder so that the cable does not become tangled at the base of the iron. The fastening between the wire and the iron itself is quite strong, but incorrect use can tear out the wires by the roots.In this case, the iron will need to be sent in for repair, although such repairs often cost more than purchasing some models of the electrical appliance itself.

Finally, thanks to the cable clamp, there is no chance that a person will get caught and trip on the cable itself while ironing. This is due to the fact that the wire is pulled to the side by the holder.

How to use an antenna on an ironing board

The antenna is attached to the far side of the board from the person. The retainer most often looks like a straight wire, which turns into a spiral downwards and is attached to a stand for the iron. On top of the holder there is a clothespin for the wire. The antenna is made of stainless material, strong in its characteristics, but capable of acquiring curved shapes, which is also enhanced by a spiral base. The wire attachment point is made of plastic material and has the diameter of a standard wire.

Before ironing fabric, a person should place the cord in the holder. This maneuver facilitates the top feeding of the wire, which ensures safe and high-quality ironing of the fabric. You should leave the required amount of wire in a free state, which will not be too much, but will not require the person to constantly pull the cord. It should be taken into account that the cable clamp is quite flexible and springy, which increases the amplitude of each action.

How can I replace the holder?

When purchasing an ironing board, you may notice that the cord holder is not always included in the package. In this case, you can buy a cable clamp separately in the same store or order it online.

Interesting! Separately purchased holders are good because they have a universal fastening to the board, which allows you to take it with you on trips if necessary or use it on a newly purchased ironing board.

Alternatively, in order to comply with all the functions described above, you can use a device that is suspended with screws from a concrete wall or a wooden cabinet wall. This device is a holder for both the cord and the iron itself. This device is especially relevant in situations with stationary ironing boards, as well as those made of wood. The dimensions of this clamp correspond to the size of the hot area of ​​the iron.

In another option, you can purchase a clothespin separately for the wire of an electrical device, if it is not included in the original package. It is a strong plastic clip with which the iron cord can be coiled and secured. This will artificially reduce the size of the wire, making its length safe and convenient to use.

Thus, the whole need for a wire holder becomes clear. According to customer reviews, those who once tried to iron fabric with a wire holder experienced inconvenience in situations without a holder.