Carbon water filter - what does it clean?

This device is necessary for every self-respecting person. As for the appearance itself, there is a plastic surface, which is intended for mineral water, and the activated coconut carbon itself. These are the two most significant components of the unit. The body itself is equipped from the inside with a special system, which includes a pipe, a distributor and a valve that regulates the frequency and duration of flushing. In addition, the control unit is capable of providing basic operating modes: filtration, reverse (where the liquid enters the purified liquid) and direct flushing (directed to the sewer line). Many people ask the question: what does a carbon water filter clean? Let's find the answer to it.

The effect of a carbon filter - how and what it cleans

Its operating principle is quite simple and effective: it is filled with activated carbon. Precisely because such a load has sorption capacity.

Water passes from the top to the bottom through it. Meanwhile, the liquid is purified from various contaminants. This process is also characterized by depletion of the container in which the coal is located. For a more optimal process, it is advisable to maintain indoor humidity - no higher than 70%.

ATTENTION. Performance is periodic.This means that the entire cycle must be carried out at a certain time interval, preferably at night. Namely, from one to two hours several times a week.

Most often, this design is installed at the last level of water purification. However, the user can use it either separately from all filters or in conjunction with them.

REFERENCE! Cylinders can be used in pairs, which significantly improves the cleansing process.

The main purpose of a carbon filter

The main goal of the work is to effectively and maximally eliminate impurities from the water flow. These may include:

1. Undesirable taste and smell.
2. Organics and organic compounds, microorganisms.
3. Suspension and/or algae, uncharacteristic color.
4. Excess active chlorine.
5. Iron, various types of sediment, rust.
6. Disinfectant compounds.
7. Bleaching.
8. Turbidity.

However, it is important to remember that the device cannot eliminate types of salts and bacteria. This is done with the help of other additional devices. And if you use them, you can avoid particles that are most likely to flake off. Use them as another cleaning step.

In addition to the above, the technology is not intended for implementation of the system in hot water supply and around all types of heater, since there is a high probability of loss of the necessary qualities and properties of the device.