Procedure for installing filters for water purification
It’s no secret that the quality of water in both city apartments and country houses leaves much to be desired. The reasons for this are different, but to bring it back to normal they use the same method - filtration. That is, a set of filters is installed on the supply line. As a rule, each filter is designed to solve a specific problem. Some remove mechanical impurities, others remove excess calcium.
The content of the article
Filter installation procedure
As a rule, several filters are used to fully purify water. But when installing them, a certain order must be followed.
Preparatory stage
Before installing the devices, you will need to do some work to prepare the site. A set of cleaning devices can be placed directly under the sink; for the most part, this place is always empty or occupied by all sorts of rubbish. If we are talking about a country house, then they can be installed in the same room through which water is introduced into the house. Only then is the purified water distributed around the house.
Filters that are used in modern purification systems allow them to be installed in two main ways:
- vertical;
- horizontally.
When choosing a place to install them, you must remember that the cartridges must be periodically replaced.That is, they must be installed so that there is easy access to the cartridges for their maintenance and replacement.
We prepare the necessary tools and materials
To install the filters, you will need to prepare holes in the wall where the bracket will be installed on which the water purification devices will be mounted. Companies that produce such products make life easier for consumers by producing products that include several filters at once. They are installed on one bracket and you just need to fix it in the chosen place. As a rule, the necessary fasteners are included in the delivery kit. The tools needed to replace the cartridges are also included in the package.
IMPORTANT!
CARTRIDGES INTENDED FOR CLEANING MUST BE CHANGED AT LEAST ONCE EVERY 6 MONTHS. OTHERWISE, AN UNKNOWLEDGE LIQUID WILL ENTER THE HOUSEb.
How to install filters for water purification: step-by-step instructions
The sequence of operations for installing filters is as follows:
- Stop water supply.
- Drain any water remaining in the pipeline.
- Install a bracket intended for installing filters in a previously prepared place.
- Install the filters in place and connect the pipeline.
When performing this operation, you should follow the requirements of the filter operating instructions.
If we are talking about installing individual filters, then, in addition to mounting them on the wall or floor, it is necessary to follow the sequence of their installation. Coarse and fine filters are installed first. They are designed to remove mechanical impurities. Following them, coal and other cleaning devices are installed.
