Is it possible to dry your phone with a hairdryer?

Anyone can encounter a situation where their phone gets wet. The mobile device may fall into the sink or toilet. In most cases, this leads to a malfunction of the phone, which means the need to buy a new one. A few tips will help solve this problem.

First steps if your phone gets wet

With quick orientation and no panic, the mobile phone may remain in working condition. In some cases, independent actions are sufficient, without contacting a specialized service.

First of all, you need to immediately remove the device from the water. Headphone ports, charging ports and other openings quickly allow moisture to pass through. After removing the case, carefully wipe it with a paper or terry towel and remove the battery from the phone.

IMPORTANT! Be careful not to allow lint from towels or paper to clog the port passages.

SIM cards are quite resistant to damage, including being under water, but it also needs to be removed and wiped. We perform similar actions with memory cards (if any).

After disassembling the parts, you need to check the phone for damage when it is under water. Modern smartphones are equipped with a special white indicator. It is located in the battery connector. If the indicator turns pink or red, the device is seriously damaged.Repair work will be required.

After removal, place all components on a paper or terry towel. The device and its parts should be turned over periodically so that moisture that gets inside finds its way to the surface.

At the initial stage, these actions will be enough to dry and revive the mobile device.

IMPORTANT! If the phone was connected to a charger when it fell, it is strictly forbidden to take it out, since water is a conductor of current. You should seek help from a specialist.

Is it possible to dry your phone with a hairdryer?

Fen has long been called the main assistant for every girl. With its help you can quickly dry and style your hair. Many people use a hair dryer to quickly dry clothes.

When your phone falls into water, the first thought that comes to mind is to dry it with a hairdryer. However, you should avoid such actions - you cannot dry the gadget with a hairdryer. Blowing with a hairdryer, even in a gentle mode, will worsen the situation. The incoming air disperses water droplets deeper into the housing. This causes the device to malfunction. After such repairs, you will need to purchase a new smartphone.

Exposure to hot air from a hair dryer can melt some of your phone's fragile components. Hot air will speed up the oxidation process of individual parts, increasing the likelihood of corrosion.

Conclusion: you should avoid using a hair dryer to dry your mobile device.

What can you do if your phone gets wet?

After all components have been removed and disassembled, it is better to leave the device for a while. There are some methods you can use to help speed up the drying process.

A few additional methods:

1. A vacuum cleaner, unlike a hair dryer, can help repair the device.Remove the brush from the hose and turn on normal mode. During the drying process, it is necessary to regularly turn the device over so that excess water does not remain inside. This process is quite lengthy, but the hose will reliably remove excess moisture from the housing. It is important not to point the hose too close to the appliance.
2. A fan is also suitable instead of a vacuum cleaner. The phone should be placed at a short distance from the fan.
3. Silicone balls or rice absorb excess liquid well. We collect grains of rice into a container, place the device inside, and also pour rice on top. It is important to create a sealing condition, so close the bowl with a lid. The container should be left overnight. This process is one of the longest, but more effective.

IMPORTANT! Placing a wet device in a microwave oven is strictly prohibited. Such actions will lead to permanent failure of the device. In addition, a phone placed inside the microwave chamber can cause an explosion.

If after preliminary repairs the smartphone still does not turn on, you need to check the functionality of the battery by connecting it to another device of the same model. If the battery works, the problem is in damaged microcircuits. Due to exposure to moisture, boards quickly corrode and oxidize. In this case, you will need to consult a specialist.

Without a mobile phone, the life of a modern person has become almost impossible. If you are not careful, the device may suffer from excessive exposure to moisture. Knowing the correct sequence of actions, you can fix the phone yourself.