Why do electronic scales show different weights?

Today, being slim is not just fashionable, it is already a way of life for many people. Of course, you can’t do without scales. Few people use mechanical devices anymore, since electronic models are relatively inexpensive and the accuracy of the readings is higher.

But there is one problem: often electronic versions show different values. Let's look at the possible reasons?

Reasons why electronic scales show incorrect weight

Why the display may show different weights:

• The surface under the device is uneven. Electronic models are very sensitive devices, so if they wobble when you stand on them, it means that the surface underneath them is uneven, and you should look for another place for them in the apartment;
• Formation of blockage. If the device is used for a long time and stored without a box on the floor, it could simply become clogged. It is necessary to disassemble it and carefully clean all elements with a brush with soft bristles;
• Failure in work. This problem may be caused by incorrect weighing rules. Recommendations to follow when weighing are given below.

How to fix the problem

What to do: electronic scales do not show weight correctly? If none of the above reasons apply, then they may be broken. The malfunction may be as follows:

1. The batteries have expired.
2. The connecting cable comes off - this is the element connecting the electronic board and the display; if it malfunctions, it will distort the data. The board should be pressed closer to the display.
3. The relay is faulty, for example, the contacts have become thin.
4. The mechanism is damaged due to exceeding the permissible weight or incorrect use of the device.
5. Incorrect calibration also leads to data corruption.

Why do electronic scales show different weights? New models must be calibrated in production. Many models provide automatic calibration. However, the measurement accuracy may be compromised if you stand on them several times in a row or move them frequently.

In this case, you can perform calibration yourself. Methods for calibrating scales can be found in the instructions for the device, and this does not require any special skills.

Electronic scales show different weights, despite the fact that they are in good condition and do not need cleaning or calibration? Then follow the following recommendations when taking measurements:

1. It is necessary to place the scales only on a flat, hard surface, and always take measurements in the same place.
2. It is important to stand on the device correctly during measurement. The feet should be placed parallel to each other. They should not move to the edges or hang off the surface of the scale. You must stand straight and calm. Do not lean against a wall or other furniture.
3. All nutritionists recommend weighing yourself in the morning on an empty stomach, without shoes and in a minimal amount of clothing. Weight can change upward over the course of a day due to the amount of food eaten and fluids drunk.

Rules for using electronic scales

To ensure that electric scales last a long time, you must not:

• Expose them to temperature changes;
• Wash them under running water;
• Shake or drop sharply;
• Place the device in direct sunlight;
• Bring the scales to heating (heating) devices;
• Use chemicals for cleaning.

Important! If you have ruled out all the problems outlined in the article, then most likely the scale needs repairs, and it needs a repairman!