What kind of socket is needed for an electric oven?

One of the favorite places for family members to spend time in an apartment or private house is the kitchen. And a modern kitchen is necessarily equipped with kitchen appliances, which are used to create culinary masterpieces. One of the representatives of the family of kitchen appliances is the oven.

But to operate after purchasing it and during subsequent installation, it must be powered by electricity. This work is usually performed by qualified specialists. But we will provide the necessary information to understand the connection procedure below.

How many phases are needed

For devices used for domestic purposes with a power of up to 9 kW, as a rule, a single-phase electrical network is used. This is due to the installation of a 220V socket and plug. For industrial applications, a three-phase connection to the electrical network is used.

It is recommended to select a socket and plug from high-quality and proven brands of electrical goods. The mechanism of the socket and plug must be made of high-quality metal, the contacts must be made of copper conductors, and the core body is most often made of ceramics. It is better to choose the body of the socket and plug from high-quality plastic, otherwise cheap products will break or crack during use.

Separate power line

When connecting the power supply, it is necessary to take into account the power of the device and the condition of the electrical wiring in the room in which it will be installed. Particular attention should be paid to rooms located in old buildings, since the wiring there is very old, and possibly even aluminum. You need this to determine whether to install a separate line or use existing electrical wiring.

All models of cabinets for household use have a power of up to 4 kW and a voltage of 220V. If you have to re-run the electrical power line, it is recommended to use the VVGng-3x2.5mm2 cable (this is a copper wire). Keep in mind that the three conductors are distributed among themselves as: phase, neutral working and protective grounding.

Precautionary measures

Be very careful when performing this work. Firstly, it is dangerous due to the possibility of electric shock, which can lead to serious injury. Secondly, incorrect connection can lead to equipment breakdown and then it will not be accepted for warranty service or repair. Thirdly, incorrect connection can also lead to fire hazards.

Be very careful and careful, and if you do not have the necessary skills and experience to carry out electrical work, then it is better to entrust this work to a qualified specialist.