How to insert staples into a furniture stapler? Refueling instructions

There are several options for inserting staples into a furniture stapler. In general, the algorithm is the same, but there are several differences depending on the specific type of model. Basic rules and step-by-step instructions, as well as safety precautions, are described in this article.

Refilling a mechanical stapler

Depending on the design features and energy source, furniture staplers are divided into 3 types:

• mechanical (driven by hand force);
• electric (battery operated);
• pneumatic (powered by compressed air).

Depending on the type of device, the instructions will differ slightly. For example, if we consider how to insert staples into a mechanical stapler, the instructions will be as follows:

1. Open the plate using your thumb and index finger, working with them simultaneously.
2. Pull it towards you and down. This will move the metal tab located at the back of the plate.
3. If there are any unused staples, they will fall out. In this case, you can understand how to thread the stapler, and whether it is worth doing.
4. New staples are inserted into the receiver and return the spring to its original location.
5. Install the metal tab back.

Before starting work, it is recommended to check how the device works.If you choose the right way to assemble the stapler, it will function normally.

Features of charging other types

As already mentioned, there are different types of devices, and this also determines how to charge a construction stapler. For example, if you choose a model with an electric motor, you need to proceed like this:

1. Lock the tool using a special button or lever.
2. Pull out the groove by applying force or pressing the button.
3. Remove the inner rod by displacing the metal spring.
4. Place the staples on this rod and insert it back.
5. The next step on how to refill a furniture stapler is to put the rod back.

Checking the operation of an electrical appliance is quite simple. You need to remove it from the safety lock and test the impact. If necessary, pre-charge the battery.

The main method for refilling a pneumatic type construction stapler is the same as the technology described above. It is necessary to lock the tool with a small lever, then pull out the groove, remove the spring and install paper clips. Then the same steps are repeated in reverse order and the operation of the device is checked.

Since pneumatic models operate using compressed air, they are quite noisy. In addition, they are distinguished by their large dimensions. Therefore, it is inconvenient to move devices from place to place. Another disadvantage is that staples constantly fly out of the magazine due to exposure to pressurized air. Therefore, you should learn how to charge a furniture stapler - you will have to perform this operation quite often.

Precautions during operation

The instructions on how to change staples in a furniture stapler also require compliance with safety precautions. The basic rules are as follows:

1. There are no particular problems with how to fill a construction stapler with staples in the case of mechanical models. But if the device is electric or pneumatic, you must initially lock it with a lever and then start working.
2. Do not use the device in rooms with noticeably humid air.
3. The design of the stapler is such that it compresses the staples, which sequentially fly out and are literally pressed into the working surface. Therefore, under no circumstances should the device be directed at yourself or other people, or animals.
4. If charging is happening for the first time, you need to make sure which brackets match. To understand how to thread a stapler, you need to understand the type of paper clips (pay attention to the depth and width parameters).
5. If, after prolonged use, a staple breaks and gets stuck in the magazine, you don't need to figure out how to thread a stapler with furniture staples. First you need to completely remove the magazine and remove the jammed staple (one or more). After this, new staples are installed according to the instructions described above.

In general, safety precautions are simple. You need to work carefully, in a well-lit place. If the device is electric, first de-energize it and only then begin to replace the fasteners.

How many staples fit into the receiver?

The answer to this question depends on the size of the working clip, that is, the magazine. To do this, you need to understand how to open a construction stapler and visually estimate the length. As a rule, it is enough to place staples in 1 or even 1.5 rows. Since each of them contains 20 elements, about 30 brackets are placed in the device at a time.

Moreover, in order for them to optimally fit a specific device, you need to specify the dimensions in the description for it. Today, staples are popular, the types of which are designated by numbers, for example, 53, 140. They have a width of 11.4 mm, 10.6 mm, respectively. There are also semicircular fasteners - they are designated by the number 36.

Now it’s clear how to load a stapler with staples. There is nothing complicated in this work - just open the top part and put the staples in the store. But at the same time, it is important to make sure that the device is directed in the opposite direction, and also to put the mechanism on stop.