How to use an airbrush for nails? Learning how to wash a gradient machine
Figuring out how to use a nail airbrush is not difficult. This device works like a small spray gun. It allows you to create a beautiful background and depict a design on the nail (using a stencil). Instructions for use, as well as basic care rules are described in this material.
The content of the article
How to use the device
To work, you will need the airbrush itself, a set of stencils, acrylic-based paints and tweezers. You should also stock up on a paper towel and protective equipment - a thick mask and gloves. Figuring out how to airbrush your nails is not difficult. The sequence of actions is as follows:
- Assemble the device - screw the nozzle to it.
- Connect all the elements together (air hose and airbrush itself).
- Connect the plug to the electrical network.
- Fill the reservoir with paint.
- Make a test run of air and paint flow so that it adheres as well as possible.
- Next, you can proceed to the main stage of how to use an airbrush on your nails. Paint is applied to the surface, which creates the main background.
- Then you need to put a stencil on the nail and treat it with a sprayer.
- Finish the drawing using a set of brushes and varnish.
- Place decorative elements - this can be colored sand, foil, stickers, rhinestones, sparkles.
- Cover with a layer of clear varnish to ensure that the design lasts as long as possible.It is applied manually - an airbrush machine on the nails will no longer be needed at the final stage.
The working technique is not too complicated, although it has its own peculiarities. So, the paint should be optimal in thickness, so if necessary, it needs to be diluted a little. If you want to get a finer line, keep the feed nozzle closer to the surface, if you want a coarse line, keep it further. Spraying is carried out not at a right angle, but at an acute angle (about 45 degrees).
What and how to wash the device
It is clear what an airbrush for nails is. Essentially, this is a small spray gun that allows you to create beautiful designs and patterns. After a few repetitions it will become easy to use. But in order for the instrument to last long enough, it must be treated after each procedure.
When considering how to wash a nail airbrush, you need to understand what base the paint is made on. If it is water-based, clean it with ordinary water, running it several times until it becomes perfectly clean.
Some paints are made based on organic components - urethane, epoxy, polyurethane. They are washed with appropriate solvents:
- 646;
- acetone;
- 647.
The principle is exactly the same - drive the liquid several times. After the last treatment it should come out completely clean, almost transparent.
It doesn’t matter what the name of the gradient nail machine is, or which specific model to choose. The principle of operation, instructions for use and processing methods will be approximately the same. Moreover, the treatment is done not only with solutions, but also with cotton swabs. They are pre-wetted in a cleaning solution so that the fluff does not stick to the inner surface.
Having figured out how to wash your nail airbrush, you also need to learn how to clean the tip of the needle, the seams on the surface of the device body and the needle cap. It is better to treat them with a soft squirrel hair brush (indicated by number 2 or 3). Since the device quickly becomes clogged due to spraying, this procedure will have to be performed quite often.
