How to replace fishing line on a trimmer: we have compiled a complete list of upgrades

prom.ua

Let's be honest. Trimmer line brings little results. It constantly breaks, you need to buy dozens of meters of wire every year, and the price is quite high! But there are several options that can be used instead of fishing line on a trimmer. We'll talk about them in our short article.

How to replace fishing line on an electric or gasoline trimmer

There are many ways that you can come up with instead of fishing line for a trimmer. True, not all of them are effective in practice, so we will only talk about a few - the main ones.

How to make a cable for a trimmer instead of a fishing line and is there any benefit from it?

The most popular and often discussed option is to install a steel cable to match the diameter of the reel or spool.

Practice has shown that it is much more effective than ordinary plastic fishing line. It does not wear out, and it mows grass clearly no worse than other options. But understand for yourself, for some reason manufacturers do not use a chain or cable instead of a line for a trimmer.

The conclusion is simple. The steel wire greatly wears out the mowing machine, namely its transmission.If a regular fishing line wears out or breaks at high speed, when a very large amount of material is unwound, then a cable does not. It wears out the mechanics of the device, and after six months of using the scythe, you don’t even need to repair it - just buy a new one.

Of course, you can try to make an eternal fishing line from a cable with your own hands. But it is important that during operation the consumable does not touch the plastic casing, and the ends are welded so that the wire does not unravel during operation. Check or not - at your own peril and risk.

How to make a fishing line from plastic ties

Plastic clamps will come to the rescue if you still have a lot of mowing to do and you’ve run out of working material. They cope with mowing young grass, while being as sharp as regular fishing line.

The only drawback is the rapid depletion of material. Plastic clamps are not intended for use in scythes, so they quickly wear out, but as an alternative in a hopeless situation, they can be useful.

Homemade fishing line for trimmer

There is an opinion that fishing lines help with mowing. The main thing is to install them correctly.

Let's say right away - this is a waste of time. Fishing line from fishing tackle is too thin and soft, so it wears out tens of times faster than a standard analogue or the same clamp.

Yes, she can cut grass and sometimes does it quite effectively. Useful as a backup option: when there is no wire at home and the store is closed for the holidays, and even for 3 weeks. For the rest, take other options.

It is worth considering that instead of a regular fishing line, you need to install the maximum thickness on the trimmer yourself. For a lawn mower, an option of at least 2 mm is suitable. Also, you will have to wind hundreds of meters onto the reels - the spool is large, and it requires a lot of consumables.

String instead of fishing line for a trimmer - how effective is the option?

There’s not even anything to talk about installing the string. It’s like using a steel cable, only the method is ten times worse, and here’s why:

1. The string is very thin. It can be even thinner than fishing line.
2. You won’t find 200-300 meters of string anywhere in the store, and you can’t wind less on a spool.
3. There is a high probability of getting the same result as with the cable. Rapid wear of the transmission of gasoline and electric scythes.
4. A very expensive option, since the strings can only be found in music stores. And believe me, their cost is off the charts.
5. There are no guarantees that the string will not bounce at speed at you or others. They are very sharp, especially at 10-12 thousand rpm.

We strongly do not recommend installing strings on the trimmer. This is ineffective and unsafe!

What knives can be put on the trimmer instead of fishing line?

m.ua

Cutting knives are an excellent alternative to fishing line. They are durable and reliable, in contrast to homemade options from the series “how to make an eternal fishing line for a trimmer” with your own hands, and even at home.

There are several options for cutting spare parts for scythes:

• Material: plastic or solid metal. The choice is based on the area to be mowed and the needs of the mower. Also, metal knives are not mounted on an electric drive. It is very weak, it produces few revolutions, so the metal plate simply will not gain momentum to the point of mowing. But iron has better cutting properties than a plastic knife.
• There are iron knives with several teeth (from 4 or more), of different heights and at the same height, as well as with and without holes. The latter characteristic simply reduces the weight of the spare part, making the scythe move faster.
• Disk shape: solid blade or several blades located at equal distances.The choice of size and type of metal structure depends on the needs of the master.
• Tip: Only use knives on straight rods. The likelihood of a stone or brick rebounding from the cutting part is high, and with a straight base, the distance to the master increases, which cannot be said about curved models.
• Plastic is a universal option for electric and gasoline scythes. It can be installed on a device of any power. The main thing is not to overdo it, because at high speeds the nozzle can simply be blown apart on the first stone. The attachment works effectively on low-power electric trimmers.

You can try to make a plastic analogue of a knife at home, but the cost of its production will be much higher than if you just go to the store and buy a couple of additional attachments.

How to make a trimmer knife at home

To make the equipment, follow the instructions in this section.

• The general dimensions of the knife are marked so that it does not extend beyond the boundaries of the plastic casing.
• We take a piece of pipe to match the diameter of the scythe spool to make the middle of our spare part - the attachment point.
• We select the diameter of the washer based on the resulting dimensions of the part and bushing. It must be welded to the pipe so that the seams are minimal.
• We make blades on a milling machine. If this is not the case, we try it ourselves with a hacksaw (which does not always work out the first time).
• When installing all spare parts, make sure that there is a minimum gap (about one and a half millimeters) so that the blades have free space to rotate during thermal expansion.

Fixing the nozzle on the shaft is carried out similarly with metal knives. Install the mounting bolt and tighten it with a scythe wrench.

conclusions

In the end, it is worth saying that it is not without reason that manufacturers use various special fishing lines or knives. The attachments work well with any type of scythe, and the quality of the results does not vary much between attachments.

For temporary use, of course, you can put a clamp or fishing line, but it’s hard to say anything about the results: once it gets tangled, the second time it breaks. The desire to stage something like this will disappear. That's all for today! Have a nice day and a successful summer season!